









U-shaped front bench seat for Volkswagen Transporter T5 / T6 L1H1: Classic Version 120×180cm
U-shaped front bench designed for Volkswagen Transporter T5 and T6 L1H1, convertible into a 120 × 180 cm bed.
✔ U-shaped lounge with central table
✔ Convertible via comb system
✔ Under-seat storage
✔ Layout adapted to the Transporter L1H1
✔ Compatible with Exokit side furniture
Structure in 15 mm birch plywood.
Sold as a kit, without cushions.
Our current lead times are 4 to 5 weeks for raw or oiled plywood furniture.
- Raw plywood: must be protected (sanded, varnished, painted, oiled, or other)
- Oiled plywood: can be cleaned with the soft side of a sponge. Oil can be reapplied to splinters. Does not require regular maintenance.
- Laminated plywood: same as usual kitchen furniture (sponge)
Choose options
U-shaped front bench seat for Volkswagen Transporter T5 / T6 L1H1: Classic Version 120×180cm
Build

your experience

A U-shaped bench seat designed for the Volkswagen Transporter T5 and T6
The Exokit front U-shaped bench seat for Volkswagen Transporter T5 and T6 L1H1 transforms the front left area of the vehicle into a truly modular living space.
Designed specifically for the Transporter's dimensions, it conforms to the bodywork reinforcements and optimizes the available width.
A friendly living space for everyday use
In day configuration, the bench seat forms a comfortable U-shaped lounge with a central table, ideal for meals or working inside.
The table consists of:
- a lightweight top,
- a leg tube,
- two bases (floor and underside of top).
Conversion into a 120 × 180 cm bed
Switching to night mode is done via the comb system integrated into the rear and central blocks.
To convert the bench seat:
- pull out the two combs,
- remove the table leg,
- place the top on the edges of the boxes.
The resulting surface is a flat bed measuring 120 cm wide by 180 cm long, corresponding to the so-called Classic version.
Three independent blocks
Block A (rear)
Equipped with a comb system, it offers accessible storage space by lifting the seat.
Block B (central)
Contributes to the sleeping surface and also provides under-seat storage.
Block C (front)
Storage locker with cupboard door on top, stabilizing the unit and optimizing storage.
Compatible with Exokit side modules
This bench seat is designed to work with:
- T5/T6 right side unit,
- rear left column,
- complete Exokit layouts.
Secure and adaptable fastening
The bench seat can be fixed:
- to the floor via 15 mm inserts and wing nuts,
- or by appropriate screws depending on the chosen layout.
This system allows for stable installation while retaining the possibility of disassembly.
15 mm birch plywood structure
The entire unit is made of 15 mm birch plywood, guaranteeing robustness and durability.
Technical characteristics
- Configuration: front U-shaped bench seat
- Bed: 120 × 180 cm
- Material: 15 mm birch plywood
- Compatibility: VW Transporter T5 / T6 L1H1
- Cushions: not included
A modular layout for Transporter
This U-shaped bench seat for Volkswagen Transporter T5/T6 L1H1 provides a modular solution allowing for quick alternation between lounge area and bed, while retaining integrated storage.
In detail
U-shaped sofa bed
Sleeping area 120 x 180 cm
Compatible Exokit T5/T6 modules

assembly instructions
Follow our step-by-step instructions to assemble your Exokit furniture.

Video notice
Watch our assembly video to install your Exokit furniture very easily.

Dimensions
In this document, you will find all the dimensions for this piece of furniture.
Tested and approved in our VW T6.1 😉
William M.
The best convertible bench seat for van conversions!
Raphael G.

A few words about Exokit
We offer you our experience gained from hundreds of van conversions.
Do not hesitate to contact us for any information.
You might also like

Side tables

Other benches

Interior trims
