Skip to content

Cart

Your cart is empty

Gas-tight lockers for campervans and converted vans

Installing a gas cylinder in a van is not to be taken lightly. Between the risks of leaks, ventilation constraints, and the requirements of inspection bodies, the issue of gas storage deserves special attention. A simple, unsealed wooden compartment is not enough: in the event of a leak, gas can accumulate in the cabin and create a dangerous situation.

Exokit sealed gas lockers have been designed to address this constraint in a serious and durable way. Made of birch plywood, they form a hermetic compartment that isolates the cylinder from the rest of the vehicle. Each model includes a dedicated space for the pigtail and regulator, and has been designed to integrate naturally into a modular van or campervan conversion.

If you are preparing for VASP approval or simply want to install gas correctly from the start, you will find the right locker for your cylinder and available space here.

Why is a sealed gas locker essential in a van?

Butane or propane gas used in vans is heavier than air. In case of a leak, it sinks and accumulates at floor level. If the storage compartment is not properly sealed and ventilated, the consequences can be severe: risk of explosion, poisoning, fire.

Safety and sealing

A sealed gas locker physically isolates the bottle from the living space. In the event of a micro-leak at the connection or regulator, the gas is confined and vented to the outside via a low ventilation opening. This is the basic principle of any secure gas installation in a converted vehicle.

Regulatory ventilation

The regulations applicable to converted vehicles require low-level ventilation of the gas compartment, opening directly to the outside of the vehicle. The locker must therefore be positioned to allow this type of drilling, typically in the floor or a low side wall.

Compatibility with VASP approval

If you plan to have your van approved as a VASP (Véhicule à Usages Spéciaux - Special Purpose Vehicle), the gas installation is one of the checked points. Having a dedicated sealed locker, correctly positioned and ventilated, is a prerequisite. Exokit lockers have been designed to simplify this process: their design meets the practical requirements posed during VASP technical inspections.

Exokit sealed gas lockers

The Exokit range includes several locker models, sized according to the most commonly used Campingaz bottles in vans and converted panel vans.

Compatibility by bottle

  • Locker for R901– Compact format, ideal for small conversions or vans with limited space.
  • Locker for R904– The right compromise between autonomy and bulk, suitable for most conversions.
  • Locker for R907– The largest model, for users who prioritize autonomy for long stays.

A design conceived for vans

Each locker has a rounded front that facilitates the sliding of the bottle inside, even in a confined space. The interior is designed to keep the bottle in a stable position and accommodate the pigtail and regulator without additional bulk.

The 15 mm birch plywood offers sufficient rigidity to support the weight of a full bottle (up to 13 kg for an R907) without deformation, even during travel.

Which gas locker to choose for your van?

Based on your bottle

The first criterion is the bottle you use or plan to use. If you haven't made your choice yet, here are some guidelines:

  • Campingaz R901 (1.8 kg)– For occasional use or as a complement to another energy source. Low bulk.
  • Campingaz R904 (4 kg)– The standard format for daily van life, with comfortable autonomy.
  • Campingaz R907 (6.5 kg)– For extended stays or setups with multiple gas appliances (hob + heating).

Based on available space

Consult the dimensions of each locker in the corresponding product sheet before finalizing your choice. In a short van, every centimeter counts: the R901 or R904 locker will fit more easily under a worktop or in a corner of the living area.

Based on your type of conversion

Exokit lockers are designed to be combined with other modules in the range: kitchen unit, pantry unit, storage drawer. If you are assembling a complete Exokit conversion, the gas locker integrates naturally into the whole, with consistent dimensions and a uniform visual appearance.

Why choose an Exokit gas locker?

The van conversion market offers a wide variety of solutions, from DIY to low-cost imported kits. Here's what distinguishes Exokit lockers.

  • Quality material.The 15 mm birch plywood is a dense, stable material resistant to the relative humidity of a van's interior. It does not sag, delaminate, or suffer damage from daily impacts.
  • Functional design.The rounded cut-out, integrated pigtail space, and dimensions calibrated to standard Campingaz bottles are not minor details: these are design choices that truly facilitate installation.
  • Compatible with the entire modular range.Exokit gas lockers share the same construction language as other furniture in the range. They assemble, attach, and combine with the rest of the conversion without adaptation.
  • Suitable for professionals.Coachbuilders, converters, VASP manufacturers: Exokit lockers are regularly integrated into professional projects where reliability and repeatability are essential criteria.
  • Durability.A well-made locker is a locker you don't need to replace. The Exokit objective is not to sell the same product multiple times, but to equip you once, correctly.

Besoin d'aide ?

Frequently asked questions about gas lockers for vans