Renault Trafic III L2H1 Crew Van Side Panels – 5mm Poplar Plywood
Lining kit for Renault Trafic III L2H1 Crew Cab version: left + right cabin area walls in 5 mm poplar plywood. Raw or oiled finish. Fasteners not included.
Compatible with Fiat Talento, Opel Vivaro B/C, Nissan NV300.
Our current lead times are 4 to 5 weeks for raw or oiled plywood furniture.
- Raw plywood: must be protected (sanded, varnished, painted, oiled, or other)
- Oiled plywood: can be cleaned with the soft side of a sponge. Oil can be reapplied to splinters. Does not require regular maintenance.
- Laminated plywood: same as usual kitchen furniture (sponge)
Choose options
Renault Trafic III L2H1 Crew Van Side Panels – 5mm Poplar Plywood
Build
your experience
Trafic III L2H1 Crew Cab Linings
The Trafic III L2H1 crew cab has a dedicated area between the passenger compartment and the cargo area, with a wall configuration distinct from the standard panel van. This kit covers the side walls of this cab area — with specific cutouts for door pillars and cable passages unique to this configuration.
5 mm Poplar in the Cab Area
In the cab area, 5 mm poplar provides a clean finish to bare metal sheets and a working surface for attaching electrical panels, switches, or light storage. Its lightness avoids overloading the living area.
Compatibility
Compatible with Fiat Talento crew cab, Opel Vivaro B/C crew cab, Nissan NV300 crew cab — same cab wall architecture.
Technical Questions
Does this kit include the cab roof or floor? No — this kit only covers the side walls of the cab area. The cab roof and cab floor are separate products.
Can this kit be combined with the standard cargo lining kit? Yes — the two kits cover distinct areas and can be installed together.
In detail
Specific deep cab
Poplar 5 mm lightweight
Compatible insulation & fit-out
assembly instructions
Follow our step-by-step instructions to assemble your Exokit furniture.
Video notice
Watch our assembly video to install your Exokit furniture very easily.
Dimensions
In this document, you will find all the dimensions for this piece of furniture.
Tested and approved in our VW T6.1 😉
William M.
The best convertible bench seat for van conversions!
Raphael G.
A few words about Exokit
We offer you our experience gained from hundreds of van conversions.
Do not hesitate to contact us for any information.
You might also like
Side tables
Other benches
Interior trims
More inspiration in our catalog
Download
Local production
All our furniture kits are manufactured in our workshops in Brittany.
green energy
We use electricity from a French supplier of 100% renewable energy.
Waste recovery
Our production techniques allow us to minimize waste and scrap.
Zero plastic packaging
We make it a point of honor not to use plastic in our packaging