Volkswagen Transporter T5/T6 L1H1 Floor – 9mm Birch Plywood

Birch Plywood for the Transporter: Robustness and Durability

The Volkswagen Transporter is often used in demanding contexts – craftsmanship, delivery, and heavily used camper vans. 9mm birch plywood meets these needs: denser than poplar, resistant to impacts and scratches, and less susceptible to moisture, even with repeated loads.

Compatible with T5 and T6

The T5 and T6 generations of the Transporter share the same underbody dimensions in the L1H1 version – a single template covers both. This floor fits both generations without modification.

Rebated Joint

The central junction between the two parts of the floor is machined with a rebate: precise interlocking, a flat surface, and no visible joint. This artisanal technique is visually superior to a simple butt joint and prevents edges from lifting or bulging under the mechanical stresses of the vehicle.

Extruded Polystyrene Option

For a Transporter used as a camper van, floor thermal insulation significantly improves winter comfort. 20mm XPS resists compression (tested at over 200 kPa without deformation) – it does not sag under heavy equipment.

Technical Questions

Is the floor cut for the side wheel arches of the T5/T6? The arches are indicated by markings, but the final cut is made on-site with a jigsaw to adapt to your exact configuration.

Can PVC be laid directly onto raw birch plywood? Yes, with contact adhesive (neoprene) or acrylic floor adhesive. A light sanding of the raw birch plywood improves adhesion.