Ford Transit Custom L2H1 MK1 Roof Lining – 5mm Poplar Plywood
Custom headliner for Ford Transit Custom L2H1 MK1, cut from 5 mm poplar plywood. 2 parts (front + rear) with engraved pre-cuts on the back — dome light, cables, partition. Raw or oiled finish.
Our current lead times are 4 to 5 weeks for raw or oiled plywood furniture.
- Raw plywood: must be protected (sanded, varnished, painted, oiled, or other)
- Oiled plywood: can be cleaned with the soft side of a sponge. Oil can be reapplied to splinters. Does not require regular maintenance.
- Laminated plywood: same as usual kitchen furniture (sponge)
Choose options
Ford Transit Custom L2H1 MK1 Roof Lining – 5mm Poplar Plywood
Build
your experience
Transit Custom L2H1 MK1: The Long Format
The L2H1 version of the Ford Transit Custom MK1 offers a larger interior volume than the short version—particularly suitable for camper van conversions, van life setups, or mobile workshops. This ceiling is CNC cut to the exact template of the L2H1 MK1.
Pre-cuts and Features
The engraved markings on the back cover standard configurations: front and rear ceiling lights, cable ducting along the ceiling, and adaptation for a partition between the cab and cargo area.
Material: 5 mm Poplar
For the L2 version, the total ceiling length for both panels is approximately 2.70 m. The 5 mm poplar maintains a reasonable weight (~8 kg for the entire set)—a manageable weight for a single person with a little preparation (sawhorses or occasional help for installation).
Installation Tips for the Long Version
Screw into every available transverse rib to prevent any central sagging of the rear panel. On Transit Custom L2 models, the ribs are well-distributed—expect 4 to 5 fixing points per panel.
Technical Questions
Is this ceiling compatible with the Transit Custom L1H1? No—the panels are of different lengths. An L2 ceiling cannot be adapted to an L1.
Recommended insulation for a converted van? Rock wool (good ratio of thermal insulation + acoustic + fire resistance), or spray polyurethane foam for hard-to-reach areas.
In detail
Specific Transit Custom L2H1
Poplar 5mm light
Ready for lighting & networks
assembly instructions
Follow our step-by-step instructions to assemble your Exokit furniture.
Video notice
Watch our assembly video to install your Exokit furniture very easily.
Dimensions
In this document, you will find all the dimensions for this piece of furniture.
Tested and approved in our VW T6.1 😉
William M.
The best convertible bench seat for van conversions!
Raphael G.
A few words about Exokit
We offer you our experience gained from hundreds of van conversions.
Do not hesitate to contact us for any information.
You might also like
Side tables
Other benches
Interior trims
More inspiration in our catalog
Download
Local production
All our furniture kits are manufactured in our workshops in Brittany.
green energy
We use electricity from a French supplier of 100% renewable energy.
Waste recovery
Our production techniques allow us to minimize waste and scrap.
Zero plastic packaging
We make it a point of honor not to use plastic in our packaging