Citroën Jumpy XL Deep Cab (K0) Roof Lining – 5 mm Poplar Plywood
Custom headliner for Citroën Jumpy XL extended cab version (K0 platform), made of 5mm poplar plywood. Specific cab cut + 8 birch squares 15mm included. Raw or oiled finish.
Compatible with Peugeot Expert 3, Toyota Proace, Opel Vivaro 3, Fiat Scudo.
Our current lead times are 4 to 5 weeks for raw or oiled plywood furniture.
- Raw plywood: must be protected (sanded, varnished, painted, oiled, or other)
- Oiled plywood: can be cleaned with the soft side of a sponge. Oil can be reapplied to splinters. Does not require regular maintenance.
- Laminated plywood: same as usual kitchen furniture (sponge)
Choose options
Citroën Jumpy XL Deep Cab (K0) Roof Lining – 5 mm Poplar Plywood
Build
your experience
Deep Cab K0: A Custom Cut
The Citroën Jumpy XL in deep cab version features an extended cab area, delimited by a partition wall. This ceiling is specifically cut for this configuration, taking into account the partition, the pillars of the cab area, and its own cable passages.
The 8 Birch Squares
Included with this ceiling, the 8 birch plywood squares (15 mm, 10x10 cm) compensate for the absence of direct bodywork reinforcements in the corners of the K0 roof. They are placed between the panel and the sheet metal to create reliable support points.
Installation in the Cab Area
The same technique as for other K0 ceilings: insulate the cab roof first, then position the birch squares in the corners, then screw the panels into the ribs and the squares. The presence of the partition requires a finishing profile (trim strip or aluminum profile) at the ceiling-partition junction.
Additional Fit-out
This ceiling covers the cab area only. The K0 cab floor, K0 cab side linings, and the complete K0 cab pack are available separately to complete the fit-out.
Compatibility
Compatible with deep cab versions of the K0 platform: Peugeot Expert 3, Toyota Proace, Opel Vivaro 3, Fiat Scudo.
Technical Questions
How is the partition handled in the cut? The ceiling stops precisely at the manufacturer's partition. A U-shaped finishing profile neatly conceals the junction.
Is this ceiling compatible with a custom partition? If the custom partition follows the same dimensions as the manufacturer's partition, yes. Otherwise, a custom cut will be necessary.
In detail
assembly instructions
Follow our step-by-step instructions to assemble your Exokit furniture.
Video notice
Watch our assembly video to install your Exokit furniture very easily.
Dimensions
In this document, you will find all the dimensions for this piece of furniture.
Tested and approved in our VW T6.1 😉
William M.
The best convertible bench seat for van conversions!
Raphael G.
A few words about Exokit
We offer you our experience gained from hundreds of van conversions.
Do not hesitate to contact us for any information.
You might also like
Side tables
Other benches
Interior trims
More inspiration in our catalog
Download
Local production
All our furniture kits are manufactured in our workshops in Brittany.
green energy
We use electricity from a French supplier of 100% renewable energy.
Waste recovery
Our production techniques allow us to minimize waste and scrap.
Zero plastic packaging
We make it a point of honor not to use plastic in our packaging